protection:build
Building The 8 Channel Input Protection Kit
NOTE: this page is a work in progress and is incomplete and unfinished as of yet.
Your kit will include the pictured items and may also include a project case, or a 3D printed DIN rail mount and associated screws or other hardware. From left to right and top to bottom:
- 8 PC814X1CSZ9F Opti Isolators
- 1 MC34063 Power Supply Regulator Chip
- 1 Circuit Board
- 9 1k 1/8 watt resistors
- 1 3 pin header and jumper
- 5 4 pin DIP Sockets
- 1 220uf electrolytic capacitor
- 1 470uf electrolytic capacitor
- 1 220uH coil
- 1 470pf capacitor
- 1 300ma PTCC fuse
- 3 0.1uf decoupling capacitors
- 3 diodes
- 1 0.33Ω wire wound sense resistor
- 1 18k 1/4w resistor
- 1 11k 1/4w resistor
- 8 4.5v zener diodes
- 7 4 pin removable headers
- 9 red LED's
- 8 68Ω resistors
- 8 10k resistors
protection/build.txt · Last modified: 2024/06/15 13:08 by James Sentman