User Tools

Site Tools


supported_hardware:rosim

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

supported_hardware:rosim [2016/05/18 14:17]
127.0.0.1 external edit
supported_hardware:rosim [2019/07/02 15:27] (current)
James Sentman added link to external plugin file
Line 1: Line 1:
 ====Rosim Traffic and Parking Systems=== ====Rosim Traffic and Parking Systems===
 +
 +**Note:** the Rosim plugin is no longer included as part of the standard distribution of XTension. To make use of the plugin please download it from [[https://​machomeautomation.com/​files/​rosim_v1.3.zip|here]],​ Unzip the file and use the “Install Plugin” from the Database menu.
  
 {{:​supported_hardware:​rosim_hardware.jpg |}} [[http://​www.rosimits.com/​index.php|Rosim]] make wireless vehical and traffic sensing systems. Easier and cheaper than cutting for a loop and sensor installation it needs only that a plug be cut out of the road to insert the wireless sensor. These sensors report to an access point and XTension connects to that access point. A “sense” or “no-sense” unit in XTension can be created to correspond to the state of any sensor connected to that access point. ​ {{:​supported_hardware:​rosim_hardware.jpg |}} [[http://​www.rosimits.com/​index.php|Rosim]] make wireless vehical and traffic sensing systems. Easier and cheaper than cutting for a loop and sensor installation it needs only that a plug be cut out of the road to insert the wireless sensor. These sensors report to an access point and XTension connects to that access point. A “sense” or “no-sense” unit in XTension can be created to correspond to the state of any sensor connected to that access point. ​
  
-Setting up in XTension ​is different than other devices ​as the Rosim access point will not accept ​an incoming connection, but will only make an outgoing connectionTherefore ​the address” of the connection setup in XTension ​is ignored ​and the port” setting is actually used to start a listening server on your XTension machine. The port number can be any “high” port (meaning above 1024) that doesn’t interfere with any other services that you’re running+The device makes an outgoing connection to XTension, unlike most devices ​which listen for an incoming connection ​from their controllerThe rosim configuration app must be used to point it to the IP address of your XTension ​machine ​and the port you select in the plugin setup.
  
-The IP address of your XTension ​machine ​and the port you’ve selected need to be set into the ethernet ​configuration ​of the Rosim WAP. After doing so it will connect to XTension and start sending us status data from the sensors.+Once the XTension ​interface is enabled ​and the configuration ​in the Rosim setup it will connect to XTension and begin sending us the data.
supported_hardware/rosim.txt · Last modified: 2019/07/02 15:27 by James Sentman