supported_hardware:w800
This is an old revision of the document!
W800
The W800 (full name W800RF32A) is an X10 wireless receiver from WGl Designs
- The W800 is a serial device and requires a USB Serial adaptor.
- Since it is a serial device you can connect multiple devices to XTension at the same time to improve reception or coverage.
- The W800 receives standard X10 devices, remotes and motion sensors as well as the security devices, door sensors, motion sensors and security remotes.
- The W800 has a coax connection for the antenna and so a higher quality antenna can be used.
- The picture shows the W800 as attached to my board in my data closet via cable tie on a pegboard.
- The W800 supports connection to XTension via a Wiznet or Barionet or other Ethernet to Serial adaptor. The proper settings when configuring the remote device are 4800 baud, 8 data bits,1 start bit and CTS/RTS selected as the flow control option.
supported_hardware/w800.1312913125.txt.gz · Last modified: 2023/02/13 14:51 (external edit)