NOTE: this page is a work in progress and is incomplete and unfinished as of yet.

Your kit will include the pictured items and may also include a project case, or a 3D printed DIN rail mount and associated screws or other hardware. From left to right and top to bottom:

• 8 PC814X1CSZ9F Opti Isolators
• 1 MC34063 Power Supply Regulator Chip
• 1 Circuit Board
• 9 1k 1/8 watt resistors
• 1 3 pin header and jumper
• 5 4 pin DIP Sockets
• 1 220uf electrolytic capacitor
• 1 470uf electrolytic capacitor
• 1 220uH coil
• 1 470pf capacitor
• 1 300ma PTCC fuse
• 3 0.1uf decoupling capacitors
• 3 diodes
• 1 0.33Ω wire wound sense resistor
• 1 18k 1/4w resistor
• 1 11k 1/4w resistor
• 8 4.5v zener diodes
• 7 4 pin removable headers
• 9 red LED's
• 8 68Ω resistors
• 8 10k resistors