=====Building The 8 Channel Input Protection Kit=====
NOTE: this page is a work in progress and is incomplete and unfinished as of yet.


Your kit will include the pictured items and may also include a project case, or a 3D printed DIN rail mount and associated screws or other hardware. From left to right and top to bottom:

 {{:protection:ip_contents.jpeg?550 |}}

  * 8 PC814X1CSZ9F Opti Isolators
  * 1 MC34063 Power Supply Regulator Chip
  * 1 Circuit Board
  * 9 1k 1/8 watt resistors
  * 1 3 pin header and jumper
  * 5 4 pin DIP Sockets
  * 1 220uf electrolytic capacitor
  * 1 470uf electrolytic capacitor
  * 1 220uH coil
  * 1 470pf capacitor
  * 1 300ma PTCC fuse
  * 3 0.1uf decoupling capacitors
  * 3 diodes
  * 1 0.33Ω wire wound sense resistor
  * 1 18k 1/4w resistor
  * 1 11k 1/4w resistor
  * 8 4.5v zener diodes
  * 7 4 pin removable headers
  * 9 red LED's
  * 8 68Ω resistors
  * 8 10k resistors