one unit Lost Communication from Hubitat to Xtension

[James Sentman]

What Philippe suggests here is a good starting point.  If anyone has such problems please do this first, but also do a filter in the log so that you can find any error messages that might have been logged by the hubitat plugin that would help me to figure out why.

If you have a device that appears to be setup properly but does not show up or does not get commands in XTension please put the hubitat plugin into debug mode and then trigger or control the device. A long chunk of JSON data will get written to the log when in debug mode that will tell me everything I need to know to get it working.

Then send me that log output along with any other information about the device off the list and I will get it working. 


> On Sep 21, 2022, at 3:09 PM, Philippe SCHMUCK <philippe-schmuck at orange.fr> wrote:
> 
> Hi Bob,
> 
> In Hubitat, go to the Marker Api app that you have configured to talk with XTension, click on « Select Devices », uncheck the unit, update and recheck the unit and update.
> In Xtension, disable the interface with the Hubitat and re-enable it to get the unit again.
> 
> Philippe
> 
>> Le 21 sept. 2022 à 21:03, Bob Hutchinson <bobhutch9 at gmail.com <mailto:bobhutch9 at gmail.com>> a écrit :
>> 
>> 
>> 
>> Thanks Philippe for the reply 
>> Sorry for being slow to respond but I’m having trouble receiving the discussion list in my e-mail and found this in the archives
>> Could you explain how to in Hubitat, suppress the unit from the communication with XTension, add it again,?
>> I tried with no luck 
>> Thanks again for any help
>> 
>> 
>> one unit Lost Communication from Hubitat to Xtension
>> 
>> Philippe Orange philippe-schmuck at orange.fr  <mailto:xtensionlist%40machomeautomation.com?Subject=Re%3A%20one%20unit%20Lost%20Communication%20from%20Hubitat%20to%20Xtension&In-Reply-To=%3C2998406E-9F0A-4EDB-A3A5-C30B1D3CE077%40orange.fr%3E>
>> Tue Aug 30 01:48:57 EDT 2022
>> 
>> Previous message: one unit Lost Communication from Hubitat to Xtension <http://mail.machomeautomation.com/pipermail/xtensionlist/2022-August/017451.html>
>> Next message: HomeKit - multiple interfaces-- Success <http://mail.machomeautomation.com/pipermail/xtensionlist/2022-August/017452.html>
>> Messages sorted by: [ date ] <http://mail.machomeautomation.com/pipermail/xtensionlist/2022-August/date.html#17453> [ thread ] <http://mail.machomeautomation.com/pipermail/xtensionlist/2022-August/thread.html#17453> [ subject ] <http://mail.machomeautomation.com/pipermail/xtensionlist/2022-August/subject.html#17453> [ author ] <http://mail.machomeautomation.com/pipermail/xtensionlist/2022-August/author.html#17453>
>> Hi Bob,
>> 
>> I had this once:
>> - in XTension, disable the interface, rename the unit to keep your On and Off scripts,
>> - in Hubitat, suppress the unit from the communication with XTension, add it again,
>> - in XTension, enable the communication with the Hubitat interface, you should see the new unit again, copy the On and Off scripts from the former one.
>> That should do the trick.
>> 
>> Sent from my iPad
>> 
>> P. Schmuck
>> 
>> > Le 29 août 2022 à 22:52, Bob Hutchinson <bobhutch9 at gmail.com <http://mail.machomeautomation.com/mailman/listinfo/xtensionlist>> a écrit :
>> > 
>> > I have a motion sensor that is connected to my Hubitat and see it respond in the Hubitat Web Page.
>> > But signal doesn’t reach xtension.
>> > I know it used to work.
>> > Any ideas?
>> > 
>> > I have three other units on the Hubitat working fine
> 

Thanks,
 James


James Sentman                       http://www.PlanetaryGear.org		http://MacHomeAutomation.com




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.machomeautomation.com/pipermail/xtensionlist/attachments/20220927/03de582d/attachment.html>