RFXtrx433XL

[KC Hundere]

Searching the internet for this problem, it seams you worked on this very
issue with the ethernet version last year.  You might have these devices
laying around:

*James Sentman* james at sentman.com
<xtensionlist%40machomeautomation.com?Subject=Re%3A%20RFXcom%20USB%20errors&In-Reply-To=%3C43030C3F-4022-40D4-8483-A93D4DA88E91%40sentman.com%3E>
*Fri Jan 18 10:37:24 EST 2019*

Hello Ger,

As far as I’ve known up until this moment there was no difference in
how the USB or the older ethernet models sent the data. They were
supposed to be identical in the packet format. Internally I don’t
treat them any different in my parsing at all, regardless of the
source they fall through the exact same decoding routines, what worked
for one should work for the other and I thought it always had. That
being said there definitely could be differences.

I did just get a couple of the BTHGN129 to experiment with (at least I
think that is what they are, the label turns the 9 at the end into a …
but hopefully they are the same) so I will do some data capture on
that and compare it to what you’re getting. What I don’t have right
here at the moment is one of the USB receivers. If you could put that
interface into debug mode and collect the output until this message is
received once or twice and then send that to me off the list that will
give me something to compare against to try to find the difference.


On Tue, Feb 25, 2020 at 8:17 AM James Sentman <james at sentman.com> wrote:

>
> Very good, that is all correct and since the older version does support it
> I already have code somewhere to decode it which will make it easier to
> move it from one place to another ;) If I need some more info from you I’ll
> get in touch.
>
>
> On Feb 25, 2020, at 10:01 AM, KC Hundere <khundere at gmail.com> wrote:
>
> This line is from the new system with the new RFXtrx433 that does not
> recognize the BTHGN 129:
>
> Feb 25, 2020 7:56:33 AM  Starting Interface "RFXCom" command:
> "/Applications/X4X/XTension.app/Contents/Resources/Plugins/rfxn.isf
> /dev/cu.usbserial-DO2XLS2F 127.0.0.1 52301 12"
>
>
> This line is from the old system with the original serial RFX
> receiver that does recognize the sensor:
>
> 2/25/20 7:57:29 AM Starting Interface "RFX" command:
> "/Applications/X4X/XTension.app/Contents/Resources/Plugins/rfx.isf
> /dev/cu.usbserial-A7004VOa 127.0.0.1 52301 431" (RFX)
>
>
> Thanks,
>  James
>
>
> James Sentman                       http://www.PlanetaryGear.org
> http://MacHomeAutomation.com
>
>
>
>
> _______________________________________________
> XTensionList mailing list
> XTensionList at machomeautomation.com
> http://mail.machomeautomation.com/mailman/listinfo/xtensionlist
>


-- 
KC Hundere
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.machomeautomation.com/pipermail/xtensionlist/attachments/20200225/33895267/attachment.html>