RFXtrx433E USB HA controller / Armacost / Part 3

[Brian Williams]

Further to:

Taking a clue from the data recorded by RFXmngr for the ON/OFF,

------------------------------------------------
Packettype    = Lighting4
subtype       = PT2262
Sequence nbr  = 0
Code          = C43EF0 decimal:12861168
S1- S24  = 1100 0100 0011 1110 1111 0000 
Pulse         = 415 usec
Signal level  = 7  -64dBm
------------------------------------------------

and the data captured by XT interface RFXn, I see the same

2017-01-31 13:47:02 RFX: RFXn: 09 13 00 35 C4 3E F0 01 A1 70 @990, 0
2017-01-31 13:47:02 RFX: RFXn: 13 00 35 C4 3E F0 01 A1 70 @990, 0
2017-01-31 13:47:02 RFX: RFXn: 4F 12 61 30 52 41 88 30 09 13 00 35 C4 3E F0 01 A1 70 @990, 0
2017-01-31 13:47:02 unknown RFXn packet type: 0x13
2017-01-31 13:47:02 unknown exotic packet of 9 bits from receiver 0 ( 13 00 35 C4 3E F0 01 A1 70)
2017-01-31 13:47:02 unparseable message from RFX ( 4F 12 61 30 52 41 88 30 09 13 00 35 C4 3E F0 01 A1 70)
2017-01-31 13:47:02 RFX: RFXn: End Call to ParseExotics


I tried variations of C43EF0:

send data bytes {"&b110001000011111011110000"} interface "RFX"

Which seemed to transmit, did NOT toggle the dimmer, and was logged:

2017-01-31 15:44:13 58 10 61 40 4C 58 C0 30 58 01 F0 20 20 20 20 0D
2017-01-31 15:44:13 RFX: RFX: Message from the UM
2017-01-31 15:44:13 RFX: RFX: 58 10 61 40 4C 58 C0 30 58 01 F0 20 20 20 20 0D @579, 0
2017-01-31 15:44:13 RFX: RFX: @579, 0

I was expecting/hoping to see  C43EF0  somewhere in there. I am missing something.

I suspect that there is more to the actual message format. I am able to toggle the dimmer from the RFXmngr, but have not yet determined the full message to use in XT.

Brian