WIZ110SR Board - CM11 issues

[james at sentman.com]

Sorry, thats 192.168.11.xxx

The reason I’m suspicious of that is that it’s the default startup address range for the wiznet, but not likely to be anybodies real network. Because the netmask is 255.255.255.0 it will try to route any TCP packets that need to reach it out to the internet instead of to the device on the local network. The discovery and programming are done via a UDP broadcast which is always limited to the local subnet, so it can reach a card that is on a different subnet as far as the TCP configuration is concerned while the TCP connection for the actual data stream cannot.

Whats the network range of the devices on your network for real? I suspect it’s going to be 192.168.0.xxx which is the default for any shared network address?


> On May 22, 2016, at 10:31 AM, James Sentman <james at sentman.com> wrote:
> 
> is your network really starting with 192.168.0.11.xxx?

Thanks,
 James


James Sentman                       http://www.PlanetaryGear.org		http://MacHomeAutomation.com




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.machomeautomation.com/pipermail/xtensionlist/attachments/20160522/67d46820/attachment.html>