Xtension USB port dead again with El Capitan update

[Heather James]

Well, there is no interface. No Kespan device, nada. Its simply a USB cable
plugged directly into a USB port on the back of the MacPro at one end, and
directly into the SmartHome 1132U on the other.

Before 10.11.4, when this happened for 10.11.1 etc, I could unplug the
1132U from USB and from the wall, unload the drivers, reload the drivers,
plug the USB into the 1132U, plug it into the wall outlet and that seemed
to do it.  Now, I do that and nothing changes.

Not sure its the time to go buy a new interface ...

So I've unplugged the 1132U  and I'll try again in 2 hours ...

                Heather James
           =------------------------------=
            thewebgal at gmail.com

>=============================<


On Tue, Mar 22, 2016 at 9:51 AM, <james at sentman.com> wrote:

>
> I mean "both power and usb” here… sorry, brain still waking up ;)
>
> On Mar 22, 2016, at 9:39 AM, James Sentman <james at sentman.com> wrote:
>
> First I would reboot with the device unplugged from both power.
>
>
> Thanks,
>  James
>
>
> James Sentman                       http://www.PlanetaryGear.org
> <http://www.planetarygear.org> http://MacHomeAutomation.com
> <http://machomeautomation.com>
>
>
>
>
>
> _______________________________________________
> XTensionList mailing list
> XTensionList at machomeautomation.com
> http://mail.machomeautomation.com/mailman/listinfo/xtensionlist
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.machomeautomation.com/pipermail/xtensionlist/attachments/20160324/9a560b84/attachment.html>