Interfacing an X-10 Security System with Xtension.

[Bob Ober]

You may not have the docs, but you got the right numbers.
Thanks
Bob
> I used to have these command codes documented somewhere, but they dont seem to have made the transition to the wiki. You have to check the (command) value in the ON script. Unfortunately they all send the same address and they never send an off so it requires more work in the script to use them.
>
> you can learn any other command you might need by adding a line like:
>
> write log “the command code is: “ & (command)
>
> but to get you started:
>
> arm away = 6
> disarm = 134
> panic = 38
> lights on = 70
> lights off = 198
>
> Thanks,
>   	James
>
>
> James Sentman                       http://sentman.com		http://MacHomeAutomation.com
>
>
>
> _______________________________________________
> XTensionList mailing list
> XTensionList at machomeautomation.com
> http://mail.machomeautomation.com/mailman/listinfo/xtensionlist