mySensors with no-error logging...

[Jeff Wooding]

I'm getting proper logging I think? Presentation is perfect.

11/14/15 12:54:36 PM MySensors: presentation packet from node: 23FF (1.5)
11/14/15 12:54:36 PM MySensors: sending config to node: 35;255;3;0;6;I
11/14/15 12:54:38 PM MySensors: node (23) sketch name: Closet Node
11/14/15 12:54:38 PM MySensors: node (23) sketch version: 1.1
11/14/15 12:54:39 PM MySensors: presentation packet from node: 2301 (Relay
1)
11/14/15 12:54:39 PM MySensors: presentation packet from node: 2302 (Relay
2)
11/14/15 12:54:39 PM MySensors: presentation packet from node: 2303 (Motion
1)
11/14/15 12:54:39 PM MySensors: presentation packet from node: 2304 (Motion
2)
11/14/15 12:54:39 PM MySensors: presentation packet from node: 2305 (Motion
3)
11/14/15 12:54:39 PM Blocked ON for Office Motion (Vera)
11/14/15 12:54:39 PM Blocked JSON for Office Motion (Vera)
11/14/15 12:54:39 PM Received OFF for (1F07) TRIP (MySensors)
11/14/15 12:54:47 PM Received value for Solar Temp of 105. (XBEE)
11/14/15 12:54:48 PM MySensors: creating unit at node level for node: 23
11/14/15 12:54:48 PM MySensors: creating child object at Address: 2303
11/14/15 12:54:48 PM MySensors: creating XTension Unit for 2303.TRIP
11/14/15 12:54:49 PM Received OFF for (2303) TRIP (MySensors)
11/14/15 12:54:51 PM MySensors: creating child object at Address: 2304
11/14/15 12:54:51 PM MySensors: creating XTension Unit for 2304.TRIP
11/14/15 12:54:51 PM Received OFF for (2304) TRIP (MySensors)
11/14/15 12:54:51 PM Received ON for (1F07) TRIP (MySensors)
11/14/15 12:54:51 PM MySensors: creating child object at Address: 2305
11/14/15 12:54:51 PM MySensors: creating XTension Unit for 2305.TRIP
11/14/15 12:54:52 PM Received OFF for (2305) TRIP (MySensors)

Thanks,
Jeff

On Sat, Nov 14, 2015 at 8:48 AM, James Sentman <james at sentman.com> wrote:

> if the log lines showing up as errors is causing too much grief here is a
> build of just the interface that properly writes them to the log without
> claiming that the command was handled in error:
>
> http://machomeautomation.com/files/mysensors.isf_alpha.zip
>
> Install as usual:
>
> you do not have to quit XTension but you do have to disable the mySensors
> interface.
>
> Control/Right click on XTension and select Show Package Contents. Open the
> Contents folder and then the Pitchers folder.
>
> Replace the mysensors.isf folder with the one from that link. Re-enable
> the interface.
>
> Now that everything is properly code signed this counts as breaking the
> application. If you have the security settings set to only allow signed
> apps this might cause an error to be displayed when you go to run it.
>
>
> Thanks,
>  James
>
>
> James Sentman                       http://sentman.com
> http://MacHomeAutomation.com
>
>
>
> _______________________________________________
> XTensionList mailing list
> XTensionList at machomeautomation.com
> http://mail.machomeautomation.com/mailman/listinfo/xtensionlist
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.machomeautomation.com/pipermail/xtensionlist/attachments/20151114/b97dda9e/attachment.html>