AD2USB

[Jeff Wooding]

Also Tom to ARM the alarm create a pseudo with...

send data "<YOUR PIN><2 is away 3 is stay>" interface "<the Name Of your
DIY"

so something like this, if your PIN is 5555

Pseudo Alarm Away
The on script would be as below no off script.
send data "55552" interface "Alarm"

Pseudo Alarm Stay
send data "55553" interface "Alarm"

Then for the Disarm pseudo you would do an on script like this...
send data "55551" interface "Alarm"
turnoff (thisUnit) in 1
if (status of "Alarm Stay") is true then turnoff "Alarm Stay"
if (status of "Alarm Away") is true then turnoff "Alarm Away"

I edited my blog here as well.
http://wooding5.com/tech/diy-alarm-interface/

Thanks,
Jeff

On Tue, Sep 16, 2014 at 10:46 PM, Jeff Wooding <jeff at qualitytubandtile.com>
wrote:

> Hey Tom what do you like about the VERA sooooo much more I will see what I
> can do with the DIY I was just using the Vera because I was lazy and it
> worked but I'm willing to try to make the XTension one work better for you,
> Ok for me and you will get the benefit also. If you create pseudos for each
> zone i.e. Kitchen then when you get a fault you will see in XTension. Just
> add this code to the diy script...
>
> -- Add Zones below as they are in your home Create a pseudo for each zone
> then this will trigger the zone
>  if ParsedFault contains "FAULT <Zone#>" and (status of "<the pseudo you
> created>") is false then
> turnon "<the pseudo you created>"
> else
> if (status of "<the pseudo you created>") is true then
> turnoff "<the pseudo you created>"
> end if
> end if
>
> That should help but tell me what you like about vera more.
>
> Also if anyone wants to chime in here on how to keep the pseudo from
> turning on and off repetitively as the script goes through the different
> faults. I think it is like smoothing out a variable. Kind of like with a
> temp but its either on or off but we want to just check to see if the off
> is really off or just not done scrolling through the list.
>
> Thanks,
> Jeff
>
> On Tue, Sep 16, 2014 at 8:49 PM, Tom Yarmas <tom at yarmas.com> wrote:
>
>> I just found a debug option in the Ademco plug-in. When I turn that on, I
>> can see that data coming from the AD2USB is just garbage. As I said, I
>> think it may be the serial driver or something in the Vera. This is
>> repeated from over and over:
>>
>> luup_log:7: (VistaAlarmPanel::processIncoming) Incoming data = ' ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` '. <0x2dcbe680>50	09/16/14 23:43:22.516	luup_log:7: (VistaAlarmPanel::processIncoming) ERROR: Invalid message. <0x2dcbe680>
>>
>>
>> On Sep 16, 2014, at 11:25 PM, Tom Yarmas <tom at yarmas.com> wrote:
>>
>> Yes, I have had the DIY interface working, but thought the Vera
>> connection offered more.
>>
>> One development is that I am looking at the log on the Vera. I think this
>> is still a serial problem on the Vera and will discuss more with their
>> support folks. The log shows entries using the Ademco interface, but gets
>> ERROR: Invalid message.
>>
>> -tom
>>
>> On Sep 16, 2014, at 10:42 PM, James Sentman <james at sentman.com> wrote:
>>
>> Hang in there for a little bit, I want to explore the DIY option for this
>> a little before we give up. Jeff Wooding has done some great work there.
>>
>>
>> On Sep 16, 2014, at 7:28 PM, Tom Yarmas <tom at yarmas.com> wrote:
>>
>> Well, I returned the Vera and the AD2USB and got replacements. Still have
>> the same problem - no serial device to adjust the baud rate on the Vera.
>>
>> Vera support logged on the Vera again and was successful in getting the
>> serial device to show up. However, the Ademco plug-in does not do anything.
>> Nothing shows up. It allows me to save a PIN, but none of the buttons
>> actually do anything to my alarm panel. Not sure where to go now. Total
>> bust getting this thing to work.
>>
>> -tom
>>
>> _______________________________________________
>> XTensionList mailing list
>> XTensionList at shed.com
>> http://shed.com/mailman/listinfo/xtensionlist
>>
>>
>> Thanks,
>> James
>>
>>
>> James Sentman                       http://sentman.com
>> http://MacHomeAutomation.com
>>
>>
>>
>> _______________________________________________
>> XTensionList mailing list
>> XTensionList at shed.com
>> http://shed.com/mailman/listinfo/xtensionlist
>>
>>
>> _______________________________________________
>> XTensionList mailing list
>> XTensionList at shed.com
>> http://shed.com/mailman/listinfo/xtensionlist
>>
>>
>>
>> _______________________________________________
>> XTensionList mailing list
>> XTensionList at shed.com
>> http://shed.com/mailman/listinfo/xtensionlist
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://shed.com/pipermail/xtensionlist/attachments/20140916/581089be/attachment.html>