AD2USB

[Hendrik van Eeden]

Tom, all you need to do is set up the Vera, then install the AD2USB plugin and the vera will auto discover.  I am assuming that you have assigned an key pad address for the  AD2USB in the vista panel.  You need to use that same address in the KeyPadAddresses variables field for the Ademco Vista Partition that will have been created.

Henk



On Sep 9, 2014, at 10:52 AM, Tom Yarmas <tom at yarmas.com> wrote:

> Jeff,
> 
> Any tips on setting the AD2USB with the Vera? I broke down and ordered a Vera Lite after trying the DIY interface. Spent hours last night trying to get the plug-in working to no avail. Not sure if I have a newer Vera and the screens have all changed or what. There is never a device in the serial port configuration screen so that I can adjust the baud rate…
> 
> -tom
> 
> 
> On Sep 3, 2014, at 5:56 AM, Jeff Wooding <jeff at qualitytubandtile.com> wrote:
> 
>> Hey Tom,
>> I have used both ways but I think due to the maturity of the Vera integration it is better. But if you do not have a Vera the DIY may be the way. My suggestion is grab a Vera they are fun!  :) But if you wanna give the DIY way a try check it out here.
>> 
>> http://wooding5.com/tech/diy-alarm-interface/
>> 
>> Thanks,
>> Jeff
>> 
>> 
>> 
>> On Tue, Sep 2, 2014 at 7:40 PM, Tom Yarmas <tom at yarmas.com> wrote:
>> I want to take the plunge on the AD2USB for interfacing with my Ademco alarm panel.
>> 
>> I saw Jeff Wooding’s post this past April, about using it with the DIY interface. Not sure how complicated it becomes to track and respond to motion detectors (faults on the Ademco) and arming, etc. I guess I can hook it up and monitor with the DIY interface and see what comes across the interface.
>> 
>> Just wondering if anyone has used it and how things work so far.
>> 
>> Also, I see some posts on other forums about attaching the AD2USB to the Vera. I have not gotten a Vera as yet, but it is on my list. Anyone used the AD2USB with the Vera and Xtension? Wondering what advantages that has?
>> 
>> Thanks.
>> 
>> -tom
>> 
>> _______________________________________________
>> XTensionList mailing list
>> XTensionList at shed.com
>> http://shed.com/mailman/listinfo/xtensionlist
>> 
>> _______________________________________________
>> XTensionList mailing list
>> XTensionList at shed.com
>> http://shed.com/mailman/listinfo/xtensionlist
> 
> _______________________________________________
> XTensionList mailing list
> XTensionList at shed.com
> http://shed.com/mailman/listinfo/xtensionlist

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://shed.com/pipermail/xtensionlist/attachments/20140909/45127428/attachment.html>