User Tools

Site Tools


supported_hardware:rosim

Rosim Traffic and Parking Systems

Note: the Rosim plugin is no longer included as part of the standard distribution of XTension. To make use of the plugin please download it from here, Unzip the file and use the “Install Plugin” from the Database menu.

Rosim make wireless vehical and traffic sensing systems. Easier and cheaper than cutting for a loop and sensor installation it needs only that a plug be cut out of the road to insert the wireless sensor. These sensors report to an access point and XTension connects to that access point. A “sense” or “no-sense” unit in XTension can be created to correspond to the state of any sensor connected to that access point.

The device makes an outgoing connection to XTension, unlike most devices which listen for an incoming connection from their controller. The rosim configuration app must be used to point it to the IP address of your XTension machine and the port you select in the plugin setup.

Once the XTension interface is enabled and the configuration in the Rosim setup it will connect to XTension and begin sending us the data.

supported_hardware/rosim.txt · Last modified: 2023/02/13 14:52 by 127.0.0.1